GOC Insights · Environment
Re-refining used oil: the same base oil for one-third of the energy
Used lubricants, transformer oils and turbine oils are costly to dispose of and costly to replace. Re-refining turns that cost into a supply.
Every refinery, power station and industrial plant produces used oil. Most of it is treated as waste. With the right process, it becomes base oil again, using about one-third of the energy needed to refine the same oil from crude.
Why used oil matters
Lubricants, transformer oils and turbine oils do not wear out. They become contaminated: with water, oxidation products, metals and additives that have broken down in service. Once they fall outside specification, operators pay twice: once to dispose of the old oil, and again to buy new.
For energy-intensive economies, that cycle carries a larger cost. Every barrel of new base oil starts as crude, and every barrel of crude refined is energy spent.
How re-refining works
Re-refining removes what service has added and leaves the base oil behind. The process is staged, and each stage is matched to the contamination found in the incoming oil.
- Pre-treatment removes free water and solids.
- Distillation separates the base oil from heavier residues in purpose-built columns.
- Desulfurization brings sulfur content back within specification.
- Testing confirms the finished oil against the required standard before it returns to service.

Used oil is a feedstock. The question is whether it leaves the site as waste or returns to it as supply.
GOC Insights
Transformer and turbine oils
Transformer and turbine oils can often be treated without a full change. Transformer oil treatment restores the oil’s insulating properties and removes moisture; turbine oil reclamation removes oxidation products. Both extend the life of the oil in service.
For utilities and plant operators, that means fewer oil changes, lower purchase volumes and less material leaving the site as waste.
What GOC delivers
Used-oil re-refining, desulfurization, hydrocarbon and condensate plant, distillation columns, transformer oil treatment and turbine oil reclamation, with water treatment chemistry for industrial plants. Contracts are structured as service, tolling or offtake arrangements, agreed per project.
Explore the Environment capability


